SMOOTH SLIDING: W10195417 Upgraded Lower Dishwasher Wheels allow the lower rack to slide in/out of the dishwasher easily. If your wheel is broken or damaged, replace it to fix those symptoms: Not cleaning dishes properly | Noisy | Leaking | Door won’t close | Door latch failure | Jerky wheel movement.

MODEL NUMBER: 8212560 Dishwasher Side Mounting Bracket Kit (includes 2 mounting brackets and 4 screws).

EASY TO INSTALL: It is made exactly fit for most top name brands (Whirlpool, Kenmore, Maytag, Amana, Jenn-Air, Estate, Magic Chef, Inglis, Crosley, Roper) and replaces part numbers: 1201084, AP3953705, PS1487167

FIT MODELS: [Kenmore] - 66512093K210, 66512413N410, 66512413N411, 66512413N412, 66512723K310, 66512723K311, 66512833K311, 66513013K111, 66513014K113, 66513023K110, 66513032K114, etc. [Whirlpool] - 7GU2300XTVQ0, 7GU2300XTVQ1, 7GU2300XTVQ2, 7GU2300XTVQ3, 7GU2300XTVS0, 7GU2300XTVS1, 7WDF530PAYM3, 7GU3800XTVY6, 7WDT790SAYM2, etc.

PREMIUM QUALITY: The replacement part is made from durable high-quality material and well-tested by the manufacturer - Meets OEM standards - Ensure long-lasting and effective performance. Fixes following symptoms: Noisy | Will not start | Will not tumble.

SMOOTH OPERATION: W10250160 Rack Adjuster Arm Clip-lock will securely hold the adjuster arm in the right position on the dishrack, allowing you to easily adjust the height of the upper rack with the adjuster. If your adjuster arm clip-lock is broken/ cracked and makes the adjuster arm keep falling off, it’s time to replace it with our new part!

PERFECT MATCH: W10250160 Rack Adjuster Arm Clip-lock replaces part numbers: #WPW1020160, PS11751100. It is made exactly fit for several models of most top-name brands (Whirlpool, Kenmore, KitchenAid, Jenn-Air, Maytag).

FIT MODELS: [Kenmore] - 66213293K112, 66513042K110, 66513042K116, 66513044K113, 66513209N410, 66513262K113, 66513269K114, 66513964K012, 66513949K015, 66513362K111, 66515049K111, 66514559N610, etc. [KitchenAid] - KUDE20FXBL4, KUDE20FXSS4, KUDE20FXWH4, KUDE20IXBL3, KUDE20IXBL6, KUDS30IXSS6, KUDE40FXBL3, UDE40FXSS2 KUDE40FXBT3, etc. [Jenn-Air] - JDB3600AWX0, JDB3600AWS0, JDB3650AWR1, JDB3600AWP0, JDB3650AWF0, etc. (detailed list below)

SUPERIOR QUALITY: W10250160 Adjuster Arm Clip-lock is made of sturdy ABS plastic with excellent wear resistance and non-cracking construction and contains no BPA material. This ensures Long-lasting performance for daily frequent use - Material safety under high temperatures of dishwasher operation (extreme heat endurance up to 250°F).

EFFORTLESS INSTALLATION: Inexpensive & easy way to fix or repair a dishwasher. Pull the upper rack from the dishwasher forward. Use a small flat-head screwdriver to push the locking clips of your old adjuster clip-lock back to release it. Insert the new part into the slot and make sure to snap it into place.

WATERTIGHT SEALING: WD8X227 & WD8X228 Dishwasher Corner Baffle Gaskets will create a tight seal between the dishwasher door and the tub, ensuring efficient water & energy spent during the cleaning operation. If your gasket has worn out or become gross, it’s time to replace it to fix those symptoms: Leaking | Not cleaning dishes properly | Excessive noise | Door won’t close | Door latch failure.

SUPERIOR QUALITY: WD8X227 & WD8X228 Dishwasher Corner Gaskets are made of high-quality rubber with excellent wear resistance and non-cracking design and contain no BPA material. This ensures Long-lasting performance for daily frequent use - Material safety under high temperatures of dishwasher operation (extreme heat endurance up to 250°F). This part also meets the requirements of ISO 9001:2015 Standard

PERFECT FIT: ▶ WD8X227 replaces part numbers: #129D9420P05, 2364, AP2038859, WD08X0196, WD08X0227, WD8X196, PS263963, EA263963. ▶ WD8X228 replaces part numbers: #129D9420P06, 2286, AP2038860, WD08X0195, WD08X0228, WD8X195, PS263964, AH263964, EA263964. This kit is made exactly fit for several models of most top-name brands such as GE, Kenmore, Hotpoint (detailed list below).

EFFORTLESS INSTALLATION: Inexpensive & easy way to fix or repair a dishwasher, no tools required. Pull out the lower rack, you can find the baffle gaskets on the two bottom corners of the dishwasher tub. It is recommended that you replace and install both left & right gaskets at the same time. Simply use your hands to remove them. Clean out any dirt and insert your new one into place.

ENHANCED STABILITY: 5001DD4001A Dishwasher Mounting Brackets Kit will ensure the dishwasher is securely attached to the side cabinet or under countertop, which reduces moving or shaking during operation. The brackets are perforated so you can cut or bend them to the desired length. If your mounting bracket is broken/ cracked, replace it to fix those symptoms: Leaking | Noisy | Dishwasher kept falling forward /shaking excessively/ hitting surrounding area.

PERFECT MATCH: 5001DD4001A Dishwasher Mounting Brackets Kit can be used for both top or side mounting applications. This Kit replaces part numbers: #PS3525525, AP4438292, 1266844, AH3525525, EA3525525. It is made exactly fit for most LG dishwasher models.

FIT MODELS: LDF7932ST LDF6810BB LDF6810BB-01 LDF6810BB-02 LDF6810ST LDF6920BB LDF7932ST, LDF7811ST LDF7811ST-01 LDF6920BB LDF6920ST LDF6920WW LDS4821ST LDF6810ST-01 D1401TB D1401TB1 D1412TB D1414TB D1607BB D1607TB D1607WB D1608BB D1608TB D1608WB D1613BB D1613TB D1613WB D1616TB LD-6090BB LD-6090BB1 LD-6090BB2 LD-6090TB LD-6090TB1 LD-6090TB2 LD-6090WB LD-6090WB1 LD-6090WB2 LD-6100BB LD-6100BB1 LD-6100TB LD-6100TB1 LD-6100WB LD-6100WB1 LD-6105BB, etc.

PREMIUM STEEL: 5001DD4001A Mounting Bracket are made of high-quality galvanized steel, which has excellent wear resistance and heavy duty to strongly hold the dishwasher. This ensures Long-lasting and effective performance under daily frequent use and operation vibration. Other parts in this Kit are also well-crafted and sturdy to fit and work like the original parts.

IMPROVED RACK STABILITY: W10082853 Dishwasher Tine Pivot Clip will secure the dishwasher's upper rack in place, preventing it from wobbling or coming off track during the wash cycle for thorough cleaning of your dishes. If your clip is cracked or damaged, replace it to fix the following symptoms: Loose or wobbly rack | Not cleaning dishes properly.

PERFECT FIT: W10082853 Tine Pivot Clip is made exactly fit for several models of top-name brands (Whirlpool, Kenmore, KitchenAid, Jenn-Air): 66512833K311, 66513122K700, 66513122K701, 66513123K703, BLB14DRANA5, DW324K1ABL0, DW724M1ASS0, GLB14BBANA0, JDB8500AWF2, JDB8700AWP3, JDB9000CWB2, JDB9000CWP2, etc (detailed list below). Replaces part numbers: #WPW10082853, WPW10082853VP, PS11748190, 1446946.

PREMIUM QUALITY: W10082853 Tine Pivot Clip is made of heavy-duty ABS plastic with excellent wear resistance and non-cracking design and contains no BPA material. This ensures Long-lasting performance for daily frequent use and heavy loads - Material safety under high temperatures of dishwasher operation (extreme heat endurance up to 250°F) - Meet OEM standards.

EFFORTLESS INSTALLATION: Please disconnect both the power & water supply and wear work gloves before starting any repair for your safety. Pull out the dishwasher upper rack and note the location of the old clip if still intact. Lift the release tab of the old clip and detach it. Then set the new clip on the tine row and hook its side tab, then snap it into place on the upper tine row. Enjoy worthy savings by replacing the superior yet affordable part yourself!

SMOOTH SLIDING: WD12X10231 Dishwasher Lower Rack Wheel with Stud allows the bottom rack of the dishwasher to slide in/out easily. If your wheel is broken or damaged, replace it to fix those symptoms: Not cleaning dishes properly | Noisy/Screeching noise | Leaking | Door won’t close | Door latch failure | Jerky wheel movement | Unbalanced dishrack.

SUPERIOR QUALITY: WD12X10231 Lower Rack Wheel & Stud are made of heavy-duty ABS plastic with excellent wear resistance and non-cracking design and contain no BPA material. This ensures Long-lasting performance for daily frequent use - Material safety under high temperatures of dishwasher operation (extreme heat endurance up to 250°F). It also has a study wheel construction for smoother sliding and better loading capacity.

PERFECT FIT: WD12X10231 Lower Rack Wheel replaces part numbers: #1263942, AP3994981, PS1481883, AH1481883, EA1481883, EAP1481883. It is made exactly fit for several models of General Electric dishwashers: GCD4800L00BB, GCD4800L00SS, GCD4800L00WW, GDT410SIF0II, GDT690SGF0WW, GDT696SSF0SS, GHDA690P00WW, GHDA690P04WW, GLDA690F00BB, GLDA690M00BB, GLDA690M02BB, GLDA690P03WW, GLDA696P02SS, GLDT690J00WW, etc. (detailed list below)

EFFORTLESS INSTALLATION: It just takes you 2 minutes to install. Please disconnect both the power & water supply before starting any repair. Unclip your old wheel from the bracket and pull it off. Align the new wheel slot and snap its locking clip into place to secure it. After installation, try to push and pull the dishwasher rack to check whether the new wheels are firmly installed.

SMOOTH SLIDING: WD12X271 Roller Wheel allows the lower rack to slide in/out of the dishwasher easily. If your roller or axle is cracked/ broken/ damaged, replace it to fix those symptoms: Not cleaning dishes properly | Noisy/Screeching noise | Leaking | Door won’t close | Door latch failure | Jerky wheel movement | Unbalanced dishrack.

SUPERIOR QUALITY: WD12X271 Roller Wheel and Axle are made of heavy-duty ABS plastic with excellent wear resistance and non-cracking design and contain no BPA material. This ensures Long-lasting performance for daily frequent use - Material safety under high temperatures of dishwasher operation (extreme heat endurance up to 250°F). The design is also upgraded with studier wheel construction for smoother sliding and better loading capacity.

PERFECT MATCH: WD12X271 Roller Wheel replaces part numbers: #WD12X271, WD12X440, WD12X426, 2955-0007, WP2955-0007, DW113, DW604, DW271, WD12X0271, WD12X0426, WD12X0440, 14200042, 472955, 793079, R0910007, R0910149, 2493, 4432652, AH2028431, AH259136, AP6007502, AP4036079, AP2039084, EA2028431, EA259136, EAP259136, PD00001039, PS259136, PS11740619, PS2028431.

FIT MODELS: It is compatible with several (not all) models of top-name brands (General Electric, Kenmore, Hotpoint, Amana): [GE] - GSD1005F00WW, GSD1100G03, GSD1100G05, GSD1100G20WW, GSD1100L01, GSD1100M20, GSD1100N00WW, GSD1103F00WW, GSD1120P25, GSD1120P30, GSD1120R35, GSD1120R45, etc. [Hotpoint] - HDA100V-61WH, HDA100V-64WH, HDA150V-60AW, HDA150V-60BW, HDA150V-60WA, HDA900V-64BA, etc. [Amana] - ADU3000CB, ADU3000DWW, ADU5000C, ADU5000CB, ADU6000C, etc. (detailed list below)

EFFORTLESS INSTALLATION: It just takes you 2 minutes to install. Please disconnect both the power & water supply before starting any repair. Pull out the lower dishrack. Press on the clip on your old wheel stud to release it then pull it off. Attach the new roller to the axle before installation. Align the new wheel assembly onto the dish rack and snap its locking clip into place to secure it. After installation, try to push and pull the dishwasher rack to check whether the new wheels are firmly installed.

SMOOTH OPERATION: W10195839 Dishwasher Rack Adjuster will allow you to easily change the height of the dishwasher's upper rack. If your rack adjuster is broken/ cracked and makes the adjuster arm keep falling off and unable to adjust rack height, it’s time to replace it with our superior yet affordable!

PERFECT MATCH: W10195839 Rack Adjuster replaces part numbers: #WPW10195839, PS11750092, AP6016799. It is made exactly fit for several models of most top-name brands (Whirlpool, Kenmore, KitchenAid, Jenn-Air, Maytag).

FIT MODELS: [Kenmore] - 66213293K112, 66513042K110, 66513042K116, 66513044K113, 66513209N410, 66513262K113, 66513269K114, 66513964K012, 66513949K015, 66513362K111, 66515049K111, 66514559N610, etc. [KitchenAid] - KUDE20FXBL4, KUDE20FXSS4, KUDE20FXWH4, KUDE20IXBL3, KUDE20IXBL6, KUDS30IXSS6, KUDE40FXBL3, UDE40FXSS2 KUDE40FXBT3, etc. [Jenn-Air] - JDB3600AWX0, JDB3600AWS0, JDB3650AWR1, JDB3600AWP0, JDB3650AWF0, etc. (detailed list below)

SUPERIOR QUALITY: W10195839 Rack Adjuster is made of sturdy ABS plastic with excellent wear resistance and non-cracking construction and contains no BPA material. This ensures Long-lasting performance for daily frequent use - Material safety under high temperatures of dishwasher operation (extreme heat endurance up to 250°F).

EFFORTLESS INSTALLATION: Inexpensive way to fix or repair a dishwasher. It just takes you 2 minutes to install. Pull out the upper rack. Unclip your old rack adjuster from the upper rack, then lower it down so the cutout lines up with its tab, then pull it off. You can easily reinstall with our new part. After installation, try to adjust the rack height to check whether the new adjusters are firmly installed.