MODEL NUMBER: WPW10181986 W10181986 Range Oven Sensor Probe.

EASY TO INSTALL: It is made exactly fit for most top name brands (Whirlpool, Maytag, Kenmore, Amana, KitchenAid, Estate, Inglis, Roper, Magic Chef, Crosley), and replaces part numbers: 8273902, AP6016450, W10131826, WPW10181986, WPW10181986VP, PS11749737.

FIT MODELS: [Kenmore] - 66475272502, 66475273502, 66495274502, 66572002101, 66572004101, 66572012101, 66572012103, 66572022101, 66572029102, 66572162302, etc. [Whirlpool] - WFE540H0AS0, 4KAER7685EW1, 4KMER7600AW1, 4KMER7685EW1, 4KWFC120MAW0, 4KWFC120MAW1, 4KWFE7685ES0, 4KWFE7685ES1, 4KWFE7685EW0, etc. [Amana] - ACR2303MFW0, ACR2303MFW1, ACR4303MEB0, ACR4303MES0, ACR4303MEW0, etc. [Maytag] - ACR2303MFW2, ACR2303MFW3, ACR2303MFW4, ACR4303MFB2, ACR4303MFB3, etc.

PREMIUM QUALITY: The replacement part is made from durable high-quality material and well-tested by the manufacturer - Meet OEM standards - Ensure long lasting and effective operation. This part fixes the following symptoms: Little to no heat when baking | Oven is too hot | Oven not heating evenly | Will not start. The tool needed for this replacement is a #2 square head screwdriver or a #2 Philips screwdriver. Remember to unplug the range before installing the part.

MODEL NUMBER: W10131825 Oven Temperature Sensor

EASY TO INSTALL: It is made exactly fit for most top name brands (KitchenAid, Whirlpool, Jenn-Air, Maytag), fits models: KEBC208KSS04, KEMS308SSS, RMC305PVS01, KEBS207SSS00, KDRP407HSS10, KEMS308SSSS05, KEBS208SSS04, KEBS107SSS04, GBS307PRS00, KEBS277SSS04, KESK901SSS06, KESS907SSS02, KEMS308SSS05, KEMS308SSS04, KERS807SSS00, RBS305PRB00, etc. Replaces part numbers: 4455636, WPW10131825, WPW10131825VP, PS11748765, AP6015486.

PREMIUM QUALITY: The replacement part is made from durable high-quality material and well-tested by the manufacturer - Meets OEM standards - Ensure long-lasting and effective performance. This part fixes the following symptoms: Oven is too hot | Little to no heat when baking | Oven not heating evenly | Will not start

MODEL NUMBER: 12001656 Oven Temperature Sensor. This oven sensor comes with two wire harness adapters. There is an adapter at one end, a probe at the other, and they are connected by an insulated wire.

WIDELY COMPATIBLE: This 12001656 Oven Temperature Sensor is made exactly fit for most top-name brands (Maytag, Jenn-Air, Magic Chef, Whirlpool, Amana, Admiral, Crosley, Norge, KitchenAid, Kenmore, Hardwick, Litton). Fit models: AER5515QAQ, AER5515QAW, AER5515QCW, AER5715QAQ, AER5715QAS, AER5715QAW, AER5715QCB, AER5715QCS, AER5715QCW, AER5725QAF, AER5725QAN, AER5725QAQ, AER5725QAW, AER5735QAB, AER5735QAF, AER5735QAN, AER5735QAQ, AER5735QAS, AER5735QAW, AER5845QAB, AER5845QAF, AER5845QAN, AER5845QAS, JDR8880RDB, etc.

REPLACEMENT PART NUMBERS: PS1570174, 04000052, 04100258, 12001357, 12001554, 12001656VP, 12500029, 1364, 704657, 71003083, 74003390, 74004471, 74004943, 74005193, 7430P003-60, 7430P005-60, 7430P008-60, 7430P008-60K, 7430P010-60, 7430P042-60, 7-4657, 8189679, 879368, AP4009009, W10127323, Y04000052, Y04100258, Y704657.

PREMIUM QUALITY: The replacement parts are made from durable high-quality material and well-tested by the manufacturer - Meet OEM standards - Ensure long lasting and effective operation. This part fixes the following symptoms: Little to no heat when baking | Oven is too hot | Oven not heating evenly | Will not start.

HIGH COMPATIBILITY: It is made exactly fit for most top name brands (Whirlpool, Maytag, Magic Chef, Jenn-Air, Amana, Crosley, Admiral), and replaces part numbers: 704111, 7432P100-60, AP4093621, PS2082000, AH2082000, EA2082000.

FIT MODELS: 31003SAA, 31003SAW, 31203KAW, 31203PAA, 31203PAQ, 31203PAV, 31203SAA, 31203SAW, 31203WAA, 31203WAW, 31213SAA, 31213WAM, 31213WAV, 8341VV, 8351VB, 8351VD, 8351VQ, 8351VS, 8351VV, 8361RV, 8361RW, A31703SAAL, A31703SAWL, A31713XAAL, A31713XATL, CG2521W, CG31400ADW, CG31600ADB, CG31600ADQ, CG31600ADV, CG34300ADA, CG34300ADT, CG34300ADW, CG34700ADD, CG34700ADQ, CG34700ADV, CGS3760ADB, CGS3760ADW, CHG9830BAB, CHG9830BAE, CLY1645BDB, CLY2235BDB, CLY2245BDB, CLY2245BDT, etc.

PREMIUM QUALITY: The replacement part is made from durable high-quality material and well-tested by the manufacturer - Meets standards - Ensure long-lasting and effective performance. This part fixes the following symptoms: Will not start | Gas igniter glows, but will not light | Element will not heat.

SAVE TIME SAVE MONEY: Inexpensive way to fix or repair a range/oven/stove. For this installation, you will need a Phillips screwdriver and needle nose pliers. First place the grate on top of the burner, then lift the burner and disconnect the wires. Next remove the two Phillips screws from the bottom of burner, pull igniter out of the burner and wiggle in the new one.

WATERTIGHT SEALING: 809006501 Dishwasher Bottom Door Gasket will create a tight seal between the dishwasher door and the tub, ensuring efficient water & energy spent during the cleaning operation. If your gasket has worn out or become moldy, it’s time to replace it to fix those symptoms: Leaking | Not cleaning dishes properly | Excessive noise | Door won’t close | Door latch failure.

PERFECT MATCH: 809006501 replaces part numbers: #154576501, 154759101, 154297601, 154297602, 154297603, 154588201, 3290453, AP5809675, PS9495545, EAP9495545. It is made exactly fit for several models of most top-name brands (Frigidaire, Electrolux, Kenmore, Crosley, Gibson, Westinghouse, Tappan, Uni, Kelvinator): 58714000100, 58714001990, 58714001993, 58714002990, DGBD2432KB0, DGBD2432KB1, DGBD2432KF0, FBD2400KB0, CDB350NW2A, CDB400KB1B, etc (detailed list below)

SUPERIOR QUALITY: 809006501 Door Gasket is made of sturdy high-grade plastic with excellent wear resistance and non-cracking design and contains no BPA material. This ensures Long-lasting performance for frequent cleaning cycles - Material safety under high temperatures of dishwasher operation (extreme heat endurance up to 250°F) - Meet OEM standards.

EFFORTLESS INSTALLATION: Pull out the lower rack. Remove the inner door screws to pull out the outer door panel. Remove your old bottom door gasket. (Take note of how the old gasket notch side fits in to make sure you lay the new one correctly). Use a flat-blade screwdriver to reach in and clean all dirt or particles in the gasket groove before installing the new part. Before you put the door panel back, check to ensure the gasket is laid evenly between the panel and the tub.

SECURE DOOR OPEN: 4933DD3001B Dishwasher Door Hinge Cable will allow the dishwasher door to open and close smoothly and securely as the door won’t swing open unexpectedly hitting the floor or corners. If your cable breaks or becomes frayed, replace it to fix those symptoms: Loose or wobbly door | Door dropping too quickly/ slamming open | Leaking | Door won’t close | Door latch failure. Our package comes with 2 Hinge Cables for you to replace on both door sides or retain for your next replacement.

PERFECT FIT: It is made exactly fit for most LG dishwasher models: 14693, D1401TB, D1401TB1, D1412TB, D1414TB, D1470TB, D1475TUR1, LD-6090BB, LD-6090WB2, LD-6105WB1, etc (detailed list below). Replaces part numbers: #4933DD3001B, 4933DD3001A, 1395107, PS3524406, AP4511304, AH3524406, EAP3524406.

SUPERIOR QUALITY: 4933DD3001B Dishwasher Door Hinge Cable is well-designed with high-grade ABS plastic holding pieces and strong wear-resistant rope - For balanced holding of your heavy dishwasher door and frequent use in the long run - Meets OEM standards. Two plastic pieces are approximately 2 inches in length by 3/4 inches in width, as well as a rope portion is approximately 8 inches in length.

EFFORTLESS INSTALLATION: Inexpensive way to fix or repair a dishwasher. Please disconnect both the power & water supply before starting any repairs. Also, disconnect the water inlet line and drain hose. Remove the screws holding the dishwasher from the counter to pull the dishwasher out. Remove the screws to release the side panel. Pull down the string to easily pull out your old hinge cable, then now you can reinstall the new one.

ENHANCED CLEANING PERFORMANCE: W10083957V Dishwasher Chopper Blade will effectively distribute water and detergent throughout the dishes and rinse away food particles in each cleaning cycle with smooth rotations & strong swings, resulting in much better performance. If your spray arm is broken or has clogged holes with calcium/soap deposits, replace it to fix those symptoms: Not cleaning dishes properly | Not draining | Leaking | Noisy.

PERFECT MATCH: W10083957V Chopper Blade replaces part numbers: #8268383, W10083957, W10083957VP, WP8268383, PS11722146, AP5983779. It is made exactly fit for several models of top-name brands (KitchenAid, Kenmore, Whirlpool, Maytag, Amana, Estate, Magic Chef, Jenn-Air, Inglis, Crosley, Roper).

FITS MODELS: [Kenmore] - 66513102K900, 66513102K901, 66513102K902, 66513103K900, 66513103K901, 66513103K902, 66513104K900, 66513212K901, 66513212K902, 66513213K900, 66513213K901, 66513213K902, 66513219K901, 66513219K902, 66513242K900, 66513242K901, etc. [Whirlpool] - 7DU1100XTSQ0, 7DU1100XTSQ2, 7DU1100XTSS0, 7DU1100XTSS4, 7GU2300XTVS0, 7GU2300XTVS3, 7GU2455XTSS0, 7GU3200XTVY0, 7GU3200XTVY4, 7GU3800XTVY3, etc (detailed list below).

SUPERIOR QUALITY: W10083957V Chopper Blade has a well-crafted and sturdy construction with high-grade wear-resistant metal materials - Ensures long-lasting performance under daily frequent use - Meets OEM standards. This part features 4 blades which offer twice as much chopping power as the 2-blade version.

SMOOTH SLIDING: 8268743 Dishwasher Upper Rack Wheel allows the upper rack to slide in/out of the dishwasher easily. Replace your damaged wheel to fix those symptoms: Not cleaning dishes properly | Noisy | Leaking | Door won’t close | Door latch failure | Broken/ Cracked top rack brackets/ wheels.

SUPERIOR QUALITY: 8268743 Upper Rack Wheel is made of heavy-duty ABS plastic with excellent wear resistance and non-cracking design and contains no BPA material. This ensures Long-lasting performance for daily frequent use and heavy loads - Material safety under high temperatures of dishwasher operation (extreme heat endurance up to 250°F) - Meet OEM standards.

PERFECT FIT: 8268743 Upper Rack Wheel replaces part numbers: #WP8268743, WP8268743VP, AP6012252, PS11745459, 830899, EAP11745459. It is made exactly fit for several models of most top-name brands (Whirlpool, Kenmore, KitchenAid): 7GU3200XTSS0, 7GU3200XTSS1, GU2200XTSB1, GU2200XTSB2, GU2200XTSB3, GU2200XTSQ1, GU2200XTSQ2, KUDI01DLBL0, KUDI01DLBL1, KUDI01FKBL0, KUDI01ILBS1, KUDI01ILBS2, KUDI01TJBT0, etc. (detailed list below)

EFFORTLESS INSTALLATION: It just takes you 5 minutes to install. Please disconnect both the power & water supply before starting any repair. Remove the upper rack and pull the rails out. Use a flat-head screwdriver to push up and release the clips at the end of the tracks. Pull out the upper rack. Remove your old wheel from the rack by pressing on its locking clip. Reinstall with the new wheel. (Make sure to push the locking clip into place so that the wheel position is fixed)

ENHANCED STABILITY: W10508950 Dishwasher Stop Track Clip will securely keep the upper dishrack from wobbling or sliding completely off the track during operation or pulling out, improving stability and reducing the risk of accidents or damage to your dishes. If your stop clip is broken/ cracked, it’s time to replace it to fix those symptoms: Top rack keeps slipping off the rail | Top rack did not have stops on the rail ends | Door latch failure.

PERFECT MATCH: W10508950 Stop Track Clip replaces part numbers: #WPW10508950, W10199682, 8562015, W10508950, 2684662, AP6022472, PS11755805, EAP11755805, PD00004770. It is made exactly fit for several models of most top-name brands (Kenmore, Whirlpool, Maytag, Amana, KitchenAid).

FIT MODELS: DU1245XTSB0, DU1245XTSQ0, DU1248XTSB0, DU1248XTSS0, ADB1400PYW2, ADB1400PYB2, 7GU3600XTSY1, GU2548XTPQ3, GU2548XTPS3, GU2548XTPS1, GU2548XTPQ1, GU2800XTVS2, GU2800XTVS3, GU2800XTVQ2, GU2800XTVQ3, GU2800XTVY2, GU2800XTVY3, GU2800XTVB3, GU2800XTVT3, GU2800XTVB2, GU2548XTPS7, WDT910SSYW1, WDT910SAYE2, WDT910SAYM2, WDT910SAYH2, WDT910SSYB2, WDT910SSYM2, WDT910SSYW2, GU3600XTVY3, GU3600XTVY2, GU3600XTVY4, GU3600XTVY1, IUD7500BS1, IUD7500BS0, IUD8500BX0, etc. (detailed list below)

SUPERIOR QUALITY: W10508950 Stop Track Clip is made of sturdy ABS plastic with excellent wear resistance and non-cracking design and contains no BPA material. This ensures Long-lasting performance for daily dishwasher frequent use - Material safety under high temperatures of dishwasher operation (extreme heat endurance up to 250°F).

EFFORTLESS INSTALLATION: Inexpensive & easy way to fix or repair a dishwasher, no tools required. Please disconnect both the power & water supply and wear work gloves before starting any repair. Pinch your old stop clip that is seated in the rack groove and pull it out. Align the new stop clip into the groove on the slide and snap it into place. Pull the rack in and out a few times to check and make sure the stop clip does not disengage from the slide.