IMPROVED RACK STABILITY: W10082853 Dishwasher Tine Pivot Clip will secure the dishwasher's upper rack in place, preventing it from wobbling or coming off track during the wash cycle for thorough cleaning of your dishes. If your clip is cracked or damaged, replace it to fix the following symptoms: Loose or wobbly rack | Not cleaning dishes properly.

PERFECT FIT: W10082853 Tine Pivot Clip is made exactly fit for several models of top-name brands (Whirlpool, Kenmore, KitchenAid, Jenn-Air): 66512833K311, 66513122K700, 66513122K701, 66513123K703, BLB14DRANA5, DW324K1ABL0, DW724M1ASS0, GLB14BBANA0, JDB8500AWF2, JDB8700AWP3, JDB9000CWB2, JDB9000CWP2, etc (detailed list below). Replaces part numbers: #WPW10082853, WPW10082853VP, PS11748190, 1446946.

PREMIUM QUALITY: W10082853 Tine Pivot Clip is made of heavy-duty ABS plastic with excellent wear resistance and non-cracking design and contains no BPA material. This ensures Long-lasting performance for daily frequent use and heavy loads - Material safety under high temperatures of dishwasher operation (extreme heat endurance up to 250°F) - Meet OEM standards.

EFFORTLESS INSTALLATION: Please disconnect both the power & water supply and wear work gloves before starting any repair for your safety. Pull out the dishwasher upper rack and note the location of the old clip if still intact. Lift the release tab of the old clip and detach it. Then set the new clip on the tine row and hook its side tab, then snap it into place on the upper tine row. Enjoy worthy savings by replacing the superior yet affordable part yourself!

SMOOTH SLIDING: WD12X10231 Dishwasher Lower Rack Wheel with Stud allows the bottom rack of the dishwasher to slide in/out easily. If your wheel is broken or damaged, replace it to fix those symptoms: Not cleaning dishes properly | Noisy/Screeching noise | Leaking | Door won’t close | Door latch failure | Jerky wheel movement | Unbalanced dishrack.

SUPERIOR QUALITY: WD12X10231 Lower Rack Wheel & Stud are made of heavy-duty ABS plastic with excellent wear resistance and non-cracking design and contain no BPA material. This ensures Long-lasting performance for daily frequent use - Material safety under high temperatures of dishwasher operation (extreme heat endurance up to 250°F). It also has a study wheel construction for smoother sliding and better loading capacity.

PERFECT FIT: WD12X10231 Lower Rack Wheel replaces part numbers: #1263942, AP3994981, PS1481883, AH1481883, EA1481883, EAP1481883. It is made exactly fit for several models of General Electric dishwashers: GCD4800L00BB, GCD4800L00SS, GCD4800L00WW, GDT410SIF0II, GDT690SGF0WW, GDT696SSF0SS, GHDA690P00WW, GHDA690P04WW, GLDA690F00BB, GLDA690M00BB, GLDA690M02BB, GLDA690P03WW, GLDA696P02SS, GLDT690J00WW, etc. (detailed list below)

EFFORTLESS INSTALLATION: It just takes you 2 minutes to install. Please disconnect both the power & water supply before starting any repair. Unclip your old wheel from the bracket and pull it off. Align the new wheel slot and snap its locking clip into place to secure it. After installation, try to push and pull the dishwasher rack to check whether the new wheels are firmly installed.

SMOOTH SLIDING: WD12X271 Roller Wheel allows the lower rack to slide in/out of the dishwasher easily. If your roller or axle is cracked/ broken/ damaged, replace it to fix those symptoms: Not cleaning dishes properly | Noisy/Screeching noise | Leaking | Door won’t close | Door latch failure | Jerky wheel movement | Unbalanced dishrack.

SUPERIOR QUALITY: WD12X271 Roller Wheel and Axle are made of heavy-duty ABS plastic with excellent wear resistance and non-cracking design and contain no BPA material. This ensures Long-lasting performance for daily frequent use - Material safety under high temperatures of dishwasher operation (extreme heat endurance up to 250°F). The design is also upgraded with studier wheel construction for smoother sliding and better loading capacity.

PERFECT MATCH: WD12X271 Roller Wheel replaces part numbers: #WD12X271, WD12X440, WD12X426, 2955-0007, WP2955-0007, DW113, DW604, DW271, WD12X0271, WD12X0426, WD12X0440, 14200042, 472955, 793079, R0910007, R0910149, 2493, 4432652, AH2028431, AH259136, AP6007502, AP4036079, AP2039084, EA2028431, EA259136, EAP259136, PD00001039, PS259136, PS11740619, PS2028431.

FIT MODELS: It is compatible with several (not all) models of top-name brands (General Electric, Kenmore, Hotpoint, Amana): [GE] - GSD1005F00WW, GSD1100G03, GSD1100G05, GSD1100G20WW, GSD1100L01, GSD1100M20, GSD1100N00WW, GSD1103F00WW, GSD1120P25, GSD1120P30, GSD1120R35, GSD1120R45, etc. [Hotpoint] - HDA100V-61WH, HDA100V-64WH, HDA150V-60AW, HDA150V-60BW, HDA150V-60WA, HDA900V-64BA, etc. [Amana] - ADU3000CB, ADU3000DWW, ADU5000C, ADU5000CB, ADU6000C, etc. (detailed list below)

EFFORTLESS INSTALLATION: It just takes you 2 minutes to install. Please disconnect both the power & water supply before starting any repair. Pull out the lower dishrack. Press on the clip on your old wheel stud to release it then pull it off. Attach the new roller to the axle before installation. Align the new wheel assembly onto the dish rack and snap its locking clip into place to secure it. After installation, try to push and pull the dishwasher rack to check whether the new wheels are firmly installed.

SMOOTH OPERATION: W10195839 Dishwasher Rack Adjuster will allow you to easily change the height of the dishwasher's upper rack. If your rack adjuster is broken/ cracked and makes the adjuster arm keep falling off and unable to adjust rack height, it’s time to replace it with our superior yet affordable!

PERFECT MATCH: W10195839 Rack Adjuster replaces part numbers: #WPW10195839, PS11750092, AP6016799. It is made exactly fit for several models of most top-name brands (Whirlpool, Kenmore, KitchenAid, Jenn-Air, Maytag).

FIT MODELS: [Kenmore] - 66213293K112, 66513042K110, 66513042K116, 66513044K113, 66513209N410, 66513262K113, 66513269K114, 66513964K012, 66513949K015, 66513362K111, 66515049K111, 66514559N610, etc. [KitchenAid] - KUDE20FXBL4, KUDE20FXSS4, KUDE20FXWH4, KUDE20IXBL3, KUDE20IXBL6, KUDS30IXSS6, KUDE40FXBL3, UDE40FXSS2 KUDE40FXBT3, etc. [Jenn-Air] - JDB3600AWX0, JDB3600AWS0, JDB3650AWR1, JDB3600AWP0, JDB3650AWF0, etc. (detailed list below)

SUPERIOR QUALITY: W10195839 Rack Adjuster is made of sturdy ABS plastic with excellent wear resistance and non-cracking construction and contains no BPA material. This ensures Long-lasting performance for daily frequent use - Material safety under high temperatures of dishwasher operation (extreme heat endurance up to 250°F).

EFFORTLESS INSTALLATION: Inexpensive way to fix or repair a dishwasher. It just takes you 2 minutes to install. Pull out the upper rack. Unclip your old rack adjuster from the upper rack, then lower it down so the cutout lines up with its tab, then pull it off. You can easily reinstall with our new part. After installation, try to adjust the rack height to check whether the new adjusters are firmly installed.

SMOOTH SLIDING: W10195416 Upgraded Lower Dishwasher Wheels allow the lower rack to slide in/out of the dishwasher easily. If your wheel breaks or becomes damaged, replace it to fix those symptoms: Not cleaning dishes properly | Noisy | Leaking | Door won’t close | Door latch failure | Jerky wheel movement.

PERFECT MATCH: It replaces part numbers: #W10195416VP, W10195416V, AP5983730, PS11722152. It is made exactly fit for several models of top-name brands (KitchenAid, Whirlpool, Maytag, Kenmore, Jenn-Air, Amana): 66513222N410, 66513222N411, 66513222N412, 66513222N413, 66513223N410, 66513223N411, 66513293K116, 66513299K110... (detailed list below)

EFFORTLESS INSTALLATION: Inexpensive way to fix or repair a dishwasher. To repair, open the dishwasher door and pull out the lower dishrack. Next, push the tab from both sides and it should pop out. To install the new wheel assembly, place it on the rack and make sure the caps overlap the wire from the inside before you clip it in place by pushing the wheel. Slide the rack back into the dishwasher to make sure it is installed correctly.

SMOOTH OPERATION: W10712394 Dishwasher Rack Adjuster Positioner will securely hold the adjuster arm in the right position on the dishrack, allowing you to easily adjust the height of the upper rack with the adjuster. If your adjuster positioner is broken/ cracked and makes the adjuster arm keep falling off, it’s time to replace it with our new part!

PERFECT MATCH: W10195840 Adjuster Positioner replaces part numbers: #WPW10195840, W10418323, PS11750093, 1872228, AH3407016, EA3407016, PS3407016, LP16233. It is made exactly fit for several models of most top-name brands (KitchenAid, Kenmore, Whirlpool, Jenn-Air, Maytag).

FIT MODELS: Kenmore - 66213293K112, 66513042K110, 66513042K116, 66513044K113, 66513209N410, 66513262K113, 66513269K114, 66513964K012, 66513949K015, 66513362K111, 66515049K111, 66514559N610, etc. KitchenAid - KUDE20FXBL4, KUDE20FXSS4, KUDE20FXWH4, KUDE20IXBL3, KUDE20IXBL6, KUDS30IXSS6, KUDE40FXBL3, UDE40FXSS2 KUDE40FXBT3, etc. Jenn-Air - JDB3600AWX0, JDB3600AWS0, JDB3650AWR1, JDB3600AWP0, JDB3650AWF0, etc. (detailed list below)

SUPERIOR QUALITY: W10195840 Adjuster Positioner is made of sturdy ABS plastic with excellent wear resistance and non-cracking construction and contains no BPA material. This ensures Long-lasting performance for daily frequent use - Material safety under high temperatures of dishwasher operation (extreme heat endurance up to 250°F).

EFFORTLESS INSTALLATION: It just takes you 2 minutes to install. Please disconnect both the power & water supply before starting any repair. Pull out the lower dishrack. Press on the clip on your old wheel stud to release it then pull it off. Attach the new roller to the axle before installation. Align the new wheel assembly onto the dish rack and snap its locking clip into place to secure it. After installation, try to push and pull the dishwasher rack to check whether the new wheels are firmly installed.

SMOOTH SLIDING: BlueStars WD35X21038 Dishwasher Lower Rack Wheel with Stud allows the bottom rack of the dishwasher to slide in/out easily. If your wheel is broken or damaged, replace it to fix those symptoms: Not cleaning dishes properly | Noisy/Screeching noise | Leaking | Door won’t close | Door latch failure | Jerky wheel movement | Unbalanced dishrack.

SUPERIOR QUALITY: WD35X21038 Lower Rack Wheel & Stud are made of heavy-duty ABS plastic with excellent wear resistance and non-cracking design and contain no BPA material. This ensures Long-lasting performance for daily frequent use - Material safety under high temperatures of dishwasher operation (extreme heat endurance up to 250°F). It also has a study wheel construction for smoother sliding and better loading capacity.

PERFECT FIT: WD35X21038 Lower Rack Wheel is made exactly fit for several models of top-name brands (General Electric, Hotpoint, Kenmore): [GE] - 1200L02, 3000B10, 3000W10, 400813, 400852, 400911, 40325119, 403411, 40410139, etc. [Kenmore] - 361402891, 36314471792, 36314475792, 36314478793, 3631516790, 3631401190, 3631401191, 3631401590, 363140159, 3631401592, etc. [Hotpoint] - HDA1000G00WH, HDA1000G02WH, HDA1000G20WH, HDA1000K01, etc. (detailed list below)

REPLACE PART NUMBERS: PS11726733, AP5986365, PS1993855, WD35X21038, WD12X10267, WD12X0272, WD12X0427, WD12X0441, WD12X10074, WD12X10076, WD12X10077, WD12X10078, WD12X10079, WD12X10080, WD12X10081, WD12X10082, WD12X10083, WD12X10084, WD12X10085, WD12X10086, WD12X10087, WD12X10088, WD12X10089, WD12X10090, WD12X10091, WD12X10092, WD12X10093, WD12X10094, WD12X10095, WD12X10096, WD12X10097, WD12X10098, WD12X10100, WD12X10265, WD12X10267, WD12X272, WD12X427, WD12X441.

EFFECTIVE DISHWASHER PROTECTION: W10258275 Bimetal Thermal Fuse acts as a safety mechanism that interrupts the electrical circuit to the heating element if the internal temperature reaches certain points, protecting the dishwasher from overload and ensuring efficient energy for each cleaning cycle. Check and replace your old thermal fuse to fix those symptoms: Not draining | Dishwasher will not start | Overheating.

PERFECT FIT: W10258275 Bimetal Thermal Fuse is made exactly fit for several models of top-name brands (Whirlpool, Kenmore, KitchenAid, Amana, Maytag, Crosley, Estate, Inglis, Jenn-Air, Roper): 66513102K900, 66513102K901, 66513103K900, 66513103K901, 7DU1100XTSQ0, 7DU1100XTSQ5, 7DU1100XTSS0, 7DU1100XTSS1, 7DU1100XTSS2, 7DU1100XTSS4, 7DU910PFGB0, 7GU2300XTVQ0, etc (detailed list below). Replaces part numbers: #1549751, 661663, AP4423189, W10136048, W10258275VP, W10344801, PS2360984, AH2360984.

PREMIUM QUALITY: W10258275 Bimetal Thermal Fuse has a solid and reliable design with high-grade wear-resistant materials - Ensures long-lasting and effective performance - Meets OEM standards. The plastic parts have high mechanical performance and good insulation. The wiring harnesses can maintain a stable current connection and offer excellent heat sensor.

EFFORTLESS INSTALLATION: Our package already includes a simple manual instruction sheet for you to easily & comfortably fix your dishwasher. Please disconnect the power and water supply, the water inlet line, and the drain hose before starting to repair. Enjoy worthy savings by replacing the superior yet affordable part yourself!

MODEL NUMBER: RCO810 Hard Start Kit includes relay, capacitor, overload and pre-wired.

SAVE TIME SAVE MONEY: Inexpensive way to fix or repair a refrigerator. Replacement part numbers: TJ90RCO810, AP4503019, ERP810, HS8, HS810, RC0810, RC100.

EASY TO INSTALL: You just need a few minutes to install it with no tools required. Doing so will boost start-up to prevent low voltage starting problems. It is made exactly fit for most Refrigerator Freezers Relay Capacitor Overload 1/12-1/5 HP, 110-125VAC.

PREMIUM QUALITY: The replacement part is made from durable high-quality material and well-tested by the manufacturer - Meets OEM standards - Ensures long-lasting and effective performance. If you are not sure whether it fits your device, please feel free to contact us via message.